Aquatec CDP 6800 Booster Pump-CDP 6840-2JO3-B221 (pump/transformer options)

Description

The single greatest investment in your RO system, to improve overall performance, is a booster pump. Supply water pressure is single greatest factor in determining water production rate, RO storage tank fill rate, and brine:permeate ratio. Installation of a booster pump will improve all of the aforementioned measures of system performance.
Supply water pressure 70-80 psi
Increase water production rate by as much as 20-50%
Improve RO tank fill rate by as much as 400%
Decrease brine water to drain by as much as 80%
Extend membrane life
Aquatec CDP-6800 Booster Pump (Model CDP-6840-2J03-B221). Three chamber diaphragm pump, self priming, and capable of being run dry. Excellent pump for boosting supply water pressure to RO systems 24-75 GPD. The pump is a must for homes with low supply water pressure (<45 psi). The pump delivers 0.38 LPM (145 GPD) at 80 psi and 0.73 LPM (278 GPD) in the fully open position. The pump comes standard with 1/4" John Guest inlet/outlet fittings and operates on 24VAC, requiring an optional110v/60 Hz transformer and pressure switch for pump operation. The transformer may be purchased separately or as part of the pump package for a small up charge. An appropriate pressure switch can be purchased separately (eBay item number:153601698652).
S
PECIFICATIONS
:
MOTOR:
TYPE:
24 VAC, Permanent Magnet,
Totally Enclosed, Non-Ventilated
LEADS:
20 AWG, 6”
PUMP DESIGN:
3 Chamber Diaphragm Pump, Self Priming,
Capable of Being Run Dry
Base: Vibration dampening with mounting holes
TYPICAL APPLICATION:
Pre-Filter Water Treatment (R.O. Boost)
MATERIALS:
HOUSINGS:
Nylon
VALVES:
EPDM
DIAPHRAGM:
Santoprene
FASTENERS:
Stainless Steel
LIQUID TEMPERATURE:
170°F (77°C) Max.
Warranty: 2 years from date of purchase
Installation instructions included.
Note: For 100-150 GPD RO systems, select CDP 8800 booster pump.